• Address: Lake Havasu City, AZ 86405 (map)
• Date Posted: 12/17/09

I have two versions of this kit, bolt on and weld on.

The kit is designed to go onto boxed rails or rectangular tubing. They were designed for 2X3” tubing, but have been used on 2x4 and even 1.5x3. If going with 6” rails, this probably isn’t the kit for you.

The pedal uses a 5.25:1 pedal ratio, which works great for light cars (t-buckets, and other 20’s type rods), but I can EASILLY change the ratio to your specs. The pedal pad comes without any holes drilled in it, because some guys just use it as is, but there is room enough to drill up to a ½” hole if wanting an aftermarket pad. These do not include the push rod, but are easy to make, and different cylinders can take different sizes.

The master cylinder mount uses MANY manual master cylinders (you provide) that have the 3 1/8” to 3 ¼” spacing which is the most common out there, or if you ask, we can drill to your specs or leave blank.. Anything from Ford single “fruit jar” cylinders to many Ford/Chevy safer dual cylinders. This mount also puts the cylinder BELOW your floor boards. Some kits put them poking up through the floor. Some guys will either cut an access hole under their seats, or if wanted, you could just fill it and check it with a small mirror under the floor.

With the weld on kit, you get the master cylinder mount, the pedal mount and the pedal. One advantage to this kit is you can place the master cylinder as far back from the pedal as needed to clear cross members and such. $60 shipped to the 48 states. Or, for $10 less, we can supply the kit in pieces, with instruction, for you to weld up.

With the bolt on kit. We have 2 versions. One version, both the mounts and the pedal are 6” apart and mounted on one mount to bolt to your frame. The other, the master cylinder mount is on its own mounting plate and the pedal is on another so you can place them where needed for the best fit possible. Because there are so many variables to different frames and how these can mount, I do not provide bolts to mount these to the frame. $70 shipped to the 48 states.

If you just need the master cylinder mount $20 plus shipping.
If you just need the pedal $30 plus shipping.